Precautions For Roof Sheets In Design
Along the perimeter of the building on the low cost color-coated corrugated roofing sheet, prevent a ring of aerated concrete prosthetic plates. The length of the provocative version is twofold: 1500 mm and 1800 mm, and the length of the pick is one-third, 500 mm and 600 mm, by drilling, grouting, ribbing, and roofing of the rear of the provocative version. The corner plate can be reinforced concrete provocative version, but in the design, the blood medicine should pay attention to a few points:
1. When the front and rear wall sections are laid in a vertical direction with the roof panel, the prosthetic version should be anchored on the two roof panels.
2. The plaster should be nailed to the wire mesh.
3. If the drain is welded with a thin steel plate, special attention should be paid to the anti-corrosion treatment.
4. The drilling depth should be 25 mm smaller than the total thickness of the picking panel and the roof panel must not be penetrated. In the design of the roof panel, we must pay more attention to some details, so as to continuously promote the development of China's roofing panel industry, and let more consumers rest assured the quality of the manufacturer's roofing panel products, so it is fundamental for the roofing panel manufacturers. It is very important to make a good product.