Category: brick machine

Brick machine door not work under manual condition

From today on, our company will explain the possible faults and troubleshooting methods of the discount qt4-15 fly ash brick machine door movement, which are divided into 5 sections. Cement brick machine price | free - burning brick machine price I. when the brick moulding machine is in production, the door of the brick machine cannot be moved manually. There are two reasons for this: 1-1 fault phenomenon: when pressing "SA3", the touch screen fault prompt shows the following: "the brick machine skip car is not in the rear limit or the limit switch is damaged, so the material door cannot be opened" Cause of failure: the brick skip car did not retreat to the rear limit or the proximity switch of the skip car's rear limit was too far away from the induction iron of the rear limit to be detected; The proximity switch doesn't work. (due to the interlock function of the equipment, the material door can only be opened when the skip car is in the rear limit) Elimination method: place the skip car in the rear limit. Make the proximity switch of the rear limit of the skip to sense the induction iron. The proximity switch indicator light is on, and the port on the touch screen is monitored, indicating that the proximity switch is in working state, and the material door can be moved. 1-2 the cause of the problem: skip place in the limit of customized qt10-15 brick moulding machine, the proximity switch position is no problem, check the port on the touch screen monitor, such as limit after skip proximity switch is not shown in working status, the "X3" input terminal of PLC when the light is not bright, probably skip limit the proximity switch is damaged or line break. After the input terminal of PLC "X3" damage, cause the proximity switch doesn't work. Exclusion method: in this case, regardless of whether the proximity switch indicator light can be on (when the indicator light is on, not necessarily in good condition), we should check whether the proximity switch is normal, then check whether the proximity switch line and PLC "X3" input terminal is normal, and then one by one according to the situation.

Characteristics of fly ash brick machine

By juniperqq, 2020-04-30
Characteristics of fly ash brick machine

cheap qt4-15 fly ash brick machine is the main equipment for producing fly ash autoclaved bricks. Fly ash autoclaved bricks use fly ash or other slag or lime sand as raw materials, add lime, gypsum and aggregate, prepared by embryo, Compression molding, efficient steam curing and other processes. The production process of the automatic brick making machine includes several major steps such as processing and preparation of raw materials, metering of ingredients according to a certain ratio, mixing, digestion, wheel rolling, compression molding, static stop curing of the blank, autoclaving curing, inspection and stacking of finished products. Since autoclaved bricks use lime sand or industrial waste slag (fly ash, beneficiation powder, slag, gangue) as the main raw material, many properties of autoclaved bricks are better than solid, such as frost resistance, corrosion resistance, compressive strength Artificial stone of clay bricks. The size of the brick is exactly the same as the ordinary solid clay brick, which is 240mm x 115mm x 53mm, so the autoclaved brick can directly replace the solid clay brick. It has the characteristics of light weight, heat insulation, sound insulation, heat insulation, scientific structure, beautiful shape, and appearance size standards. It is a new wall material developed and applied by the country. Get automatic brick making machine price today. Fly ash brick machine production line equipment includes: mixer, digester, autoclave brick machine, wheel mill, autoclave and other main equipment and box feeder, screw conveyor, bucket, aggregate weigh, belt conveyor Machine, maintenance trolley, shuttle bus and other auxiliary equipment. The product strength of the automatic brick making machine can reach MU20, the production technology level is high, and the energy consumption is low. The products are widely used in building foundations and internal and external walls. Fly ash brick machine can use a lot of fly ash, and can use wet ash discharge. At least 800kg of fly ash can be used for every 1m of brick produced, and a brick factory with an annual output of 50 million pieces can use 60,000 tons of fly ash. This is undoubtedly of great significance for saving land and protecting the ecological environment. Autoclaved bricks have a certain scale of production in various parts of China, and their application has been quite common.